On Microsoft's Wireless Notebook Optical Mouse , the right and left click buttons are actually part of the same assembly. Here you can see the bottom side of the single piece of plastic that serves as the mouse's right and left click buttons. When the wireless notebook mouse's battery compartment and right and left click buttons are removed, you can see glimpses of the circuit board within. Removing the four rubberized feet from the mouse's bottom cover reveals four Phillips-headed screws.
When those screws are removed, the mouse slides apart, essentially in two sections. Here you can see the bottom half that boasts the circuit board, scroll wheel, antenna and other apparatus. Here's a closeup of the antenna used to broadcast the mouse's movements and clicks to the notebook receiver. This Microsoft mouse model broadcasts at 27 MHz and features a reliable range of approximately six feet.
The device's optical sensor, meanwhile, reads up to 6, frames per second. The wireless notebook mouse's circuit board is easily removed once the four screws that hold the device together are released.
Here you can see the optical LED eye used to track the mouse's movements. Microsoft claims this model optical LED eye reads an X-Y resolution of 1, points per inch and tracks at a speed up to 15 inches per second. The mouse's top cover, shown here, serves as the top half of the two plates, or assemblies, that form the Wireless Notebook Optical Mouse The bottom plate, shown here, serves as the bottom half of the two assemblies that compose the Microsoft wireless notebook mouse.
Here's a view inside the bottom of the mouse's top cover. You can see the barrel plastic designed to hold the AA battery to the bottom right.
At the top center is the cutout to accomodate the mouse's scroll wheel. Also at the top are two somewhat square cutouts. Those accept the plastic tabs from the left and right click buttons and enable clicks to be transmitted as electrical signals to the device's circuit board. The scroll wheel itself is smaller than a pawn from a regulation Stanton chess set.
This little rubberized wheel, though, likely plays as great a role in daily computing as the pawn does in tournament chess! Following deconstruction, these are all the components that constitute the wireless notebook mouse. Erik Eckel owns and operates two technology companies. A red indicator light means that it is time to change the battery. Remove the wireless receiver from the bottom the mouse.
Insert it into an available USB port on your computer. Keep the mouse within three feet of the computer. Metal obstacles between the mouse and the receiver may prevent the signal from reaching the computer. Use a mouse pad when working on a glass surface or any other surface on which the mouse has difficulty tracking movement. Press the left button for normal clicking and double-clicking and the right button for program-specific features. I've had to remove the battery which is not a good solution.
This manual comes under the category Mice and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Below, you will find the most frequently asked questions about the Microsoft Wireless Notebook Optical Mouse Is your question not listed?
ENG: Ins er t th e bat te rie s into the m ous e and th en clo se the co ver. See th e Pro duc t. PTB : Insira as pil has no m ous e e fech e a tam pa. Cons ulte o Guia d o Prod uto.
Con sul tez le gui de. IT A: Ins eri re le pil e nel m ous e e chiude re il co per chio.
0コメント